Wholesale Price Automatic Vertical Lamination Machine (Standard Type) From China Factory

Introduction

QLFM-1100A fully automatic vertical lamination machine is designed for waterbased glue and thermal lamination multi-functions. Features high automation, high laminating speed, high accuracy, electrical appliance is centralized by programmable system, touch screen easy to operate. 

The laminating machine, or generally referred to as lamination machine (is also called a laminator), is a device for sealing documents or any other suitable articles on both sides of articles with a protective layer (usually made of plastic film). The quality Automatic vertical lamination machines we produced, have met high standard as Europe and exported to worldwide with competitive price. At the same time our products get good comments from buyers. At the same time we own advanced production technology and senior designers for OEM and ODM. Please contact with our representatives and inquiry for good price in bulk.

 

Configuration & Functions:

1. Automatic High Speed Feeder: Adopt high speed pneumatic offset feeder, speed up to 100m/min. Pre-stacking system can realize non-stop feeding, obviously improving work efficiency. 

2. High Accuracy Lap Control: Servo-controlled lap within ±2mm, synchronizes with feeder, high accuracy front lay and pnuematic side lay regulator ensure accurate and stable position.

3. Automatic Shutdown Protection System: Equipped with photoelectrically controlled automatic shutdown protection devices, in case of paper shortage, paper broken and paper overlap.

4. Drying And Heating System:The 800mm diameter large heating roller equipped with Electromagnetic Heating Device, at the same time supported with Hot Air Cycle System, can realize high speed booting and heating in 5~10 minutes, 2 times than traditional oil heating device meanwhile save much power consumption.  

5. Automatic Hydraulic System: The hydraulic system automatically provides stable and large pressure to ensure high quality of lamination.   

6. Man-machine Interface System:Equipped with 10 inch color touch screen, easy and convenient to operate. The operator can view the machine's working status at any time from the touch screen.

7. Air Shaft and Tension Control System:Adopt air shaft, easy to load film, accurate film position by the graduation of the air shaft. At the same time the intelligent tention system easy to control the tention of film, increase laminating performance.

8. Slitting System:Adopt disc knife, coordinated with pneumatic pull and separating device, can slit BOPP and OPP film perfectly.(If you use PET or thin foil, we have Chain knife slitting machine optional.)

9. Anti-Curvature System: Adopt corrugrated delivery and anti-curvature system, especially designed for thin paper, avoid paper curve.

10. Automatic Stacker:Equipped with IR sensor, automatically count the sheets. Three-direction high speed pneumatic stacker can collect the sheets automatically and flat without stopping.

Parameter:

Mode	QLFM-1100A
Max.Paper Size	1000X1050mm
Min.Paper Size	285X350mm
Paper Thickness	100-500gsm
Film Thickness	8~25 micron
Max. Speed	80m/min
Voltge	380V 50Hz
Total Power	58KW
Working Power	25~40KW
Lap Accuracy	±2mm
Lamination Pressure	5~15Mpa
Coating Glue Amount	3~8g/m^2
Hight of Feeder Pile	1000mm
Hight of Stacker Pile	1000mm
Dimension (L*W*H)	9500×2200×2400mm
Total Weight	8500 kg

Actual Photo

1. Feeder Part

Adopt high speed offset feeder and chain drive non-stop pre-stacking system, can feed sheets up to 100 m/min, smoothly without stop, obviously increase the efficience.

2. Delivery Platform

Equipped with high accuracy front lay and pneumatic side lay regulator, accurate position, can deliver sheets in high speed without curvature.

3. Lamination Main Part

Adopt 800mm diameter big mirror heating roller, equipped with electromagnetic heating system, high heating speed and performance, at the same time the heat cycle system and hot air cycle system can save much energy.

400mm diameter mirror laminating roller, also equipped with electromagnetic heating system, cooperate with 300mm big rubber roller to insure laminating performance.

Electrical appliance is centralized by programmable system, with double eletromagnetic heating system drive.

4. Glue Coating Part

Adopt high accuracy glue coating regulator, can control a erasing knife to adjust coating thickness easily and accurately, save much glue consumption. Mirror coating roller ensure the glue is even.

Air shaft with dividing ruler, can adjust the position of film roll accurately, easy to load film. The tension of film is adjusted accurately by the tension controller. 

Equipped with 10 inch color touch screen, easy and convenient to operate. The operator can view the machine's working status at any time from the touch screen.

5. Slitting Part

Adopt disc knife, coordinate with pneumatic pull and separating system, can slit BOPP and OPP film perfectly. (If you use PET or thin foil, we have chain knife slitting machine optional)

6.Stacking Part

Automatic stacker, stack sheets in 3 directions fast, makes sheets pile aligned, convenient to transport and ready for next process.

Main Parts

Touch screen	ChineseTaiwan Weinview
Encoder	Japan Omron
Inverter	China Kewo
AC contactor	France Schneider
Intermediate relay	France Schneider
Push button switch	China Yijia
Small broken fuser	China Chint
Programming Controller	Chinese Taiwan Delta
Servo Drive	Chinese Taiwan Delta
Servo motor 1.1KW	Chinese Taiwan Delta
Motor5.5KW	China Dongfang
High speed Feeder	China Ruida

Specification mentioned here is subject to change without notice.

FAQ

1. What's your Lead Time?

Regularly within 30 days after payment of deposit.

2. Packaging?

Adopts moisture-proof and shock-proof packaging which is suitable for long-distance road transportation and various types of weather conditions. 

3. How about After-Sales Service?

We provide 1 year warranty period. During the period, we supply the spare parts in free for replacement in case of any quality problem. And you will enjoy life time technical support by our professional after-sales team.

4. Do you have engineer available for installation, training and test to my factory?

Don’t worry, of course we have. All the machines have been adjusted and tested well in our workshop. But If you require, our engineer will come to your factory for technical support. You just pay for the VISA, round air tickets, salary 80 USD/day, provide food and accommodation upon final confirmation.

5. Any certifications？

Yes all the machines have passed ISO9001 and CE certification. And we have several patents about chain knife, heating roller and powder cleaning.