Buy Water Based Cold Laminating Machine From China Factory

Description of water based cold laminating machine

SFM-1200 water based cold laminating machine is a water-soluble laminating machine, which uses water-soluble environmental glue.Its printing is both environmental protection and beautiful. Paper coating film has good adhesion, high transparency, can dissolve the surface of printed matter powder spraying. Our SFM-1200 water based cold laminating machine is of high quality, and no snow spots appear on the finished products, so that the paper surface is bright and beautiful, with moisture-proof and anti-fouling functions.

Technical Parameters of water based cold laminating machine

Main parts：

Actual photos

FAQ about water based cold laminating machine

1. What is laminating?

The lamination process is the surface treatment process after printing, also known as post-printing lamination, post-printing lamination or post-printing lamination. Specifically, it refers to the use of laminating machine on the surface of the printed matter to form a thickness of 0.012 to 0.020 mm transparent plastic film layer, in order to form a paper-plastic integrated product processing technology.

Laminating machine is the equipment used to complete the laminating process. Generally speaking, according to the process can be divided into instant film and pre-film, according to different film materials can be divided into bright film and matt film two.

We are a professional laminator manufacturer with rich experience and technical foundation.

2. What are the common faults of the laminating machine?

Automatic laminating machine cannot start: the input line is blocked, the power line is connected backwards, the voltage is insufficient.

Incorrect temperature measurement: thermocouple, temperature controller. Whether the installation is wrong or damaged.

Vacuum degree has not reached: the air path has not opened, the hand valve or the solenoid valve has not closed, the vacuum pump motor belt is loose, the vacuum gauge damage.

The surface of the covered workpiece is folded, not smooth or cannot wrap Angle: film is not straight, film quality is not good, the workpiece is not polished, known too much glue, the mold below the workpiece is too low.

Film is not in place: source vacuum is insufficient, air leakage, temperature is insufficient, film is too thin, the workpiece is pasted by other materials, the concave depth of the workpiece is more than the film lift, suction time is too short, the film did not lift, the workpiece distance is too close.

Main power switch tripping: input line leakage at the top of the heating box, distribution box leakage, external line leakage on the equipment, motor leakage, etc.

Cold roll laminators use a plastic film which is coated with an adhesive and glossy backing which does not adhere to the glue. Use of various types of adhesive - latex adhesive, polyvinyl alcohol, acrylic adhesive, water-based adhesive, this type of adhesive machine allows the use of a variety of materials in different sectors of lamination. The quality water based glue laminating machines, we produced, has met high standard as Europe and exported to worldwide with competitive price. At the same time our products get good comments from buyers. At the same time we own advanced production technology and senior designers for OEM and ODM. Please contact with our representatives and inquiry for good price in bulk.